Bush TR130 User Manual download pdf (Page 2)

Getting started

Thank you for purchasing your

new Bush product.

Remove your Bush TR130 carefully

from the box. You may wish to

store the packaging for future use.

Adjusting the sound

Rotate the Volume control to set

the sound level.

The Tone control can be adjusted to

your personal preference.

Read these instructions before use. HeodphoneS

Switching on

Mains power

Insert the mains power cord into the socket

on the rear of the unit.

Connect the 3-pin mains plug into the mains

socket and switch on.

Please Note

When not in use, disconnect the 3-

pin plug from the mains power and

the power cord from the unit.

Batteries

To use battery power, ensure the mains lead is

removed from the AC socket. Remove the

battery compartment cover.

Fit 6 X C size battery (not supplied)into

the compartment.

Refit the battery compartment cover.

Plug your headphones into the

Headphones socket on the side of

the unit.

Headphones should have a 3.5mm

diameter stereo plug and a

impedance of 8-32 ohms.

When headphones are connected,

the speakers are automatically

disconnected.

Using the radio

Tuning

Rotate the Volume control to turn

the unit on.

Select the desired frequency band

(FM, MW and LW) using the.Band

selector buttons.

Tune to the desired radio station by

turning the Tuning control until the

white line coincides with the correct

frequency on the scale.

Aerial

For reception the signals are picked up

through the built-in antenna. You may have

to move the radio to obtain the best

reception.

To turn the radio off

Rotate the Volume control towards

the off position until it clicks.

1 2 3 4

Comments to this Manuals

No comments