Bush BTVD91186B User Manual download pdf (Page 10)

For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105

AERIAL

Getting Started

Toviewtelevisionchannelscorrectly,asignalmust

be received from one of the following sources:

- An indoor or outdoor aerial antenna

- RF output of a cable system

- RF output of a satellite system

Note:

For receiving over-the-air TV broadcasts, we

recommend that you use an external roof antenna.

Should you require the use of an indoor antenna,

please ensure that you purchase an antenna

with sufcient ability to receive in weak signal

areas. Only when you are in close proximity to

a transmitter will an indoor antenna reproduce a

signal as strongly as a roof antenna.

Connecting a TV antenna

To wall outlet

Connecting a power cord

• ConnecttheACpowercordintoawalloutlet.

• Pressthe

/ I button on the unit or remote control

to turn the TV on.

Note:

• Be sure the AC power cord is disconnected

and the TV is switched off before making

connections.

• Make sure that all the components are connected

correctly.

• When you are not going to use the unit for a long

period of time, disconnect the power cord.

• The mains plug is used as the disconnecting

device. It should remain readily accessible and

should not be obstructed during use. To be

completely disconnected from the supply mains,

the mains plug of the TV should be disconnected

from the mains socket outlet completely.

Satellite / Cable RF Out or

TV antenna cable to

TV AERIAL CABLE Terminal

(cable not included)

There is a CI slot at top center of the cabinet which

allows you to insert a CAM (Conditional Access

Module) with an appropriate viewing card for some

subscription TV services..

You need to subscribe to a pay channel company who

administer the payments and viewing card distribution

for these services.

Fully insert the CAM (Conditional Access Module) into

the CI (Common Interface) slot on the top of the unit

with the service provider’s label facing backward.

Common interface

Important notes:

• Switch off the TV and unplug from the AC power

mains before insert or remove the CAM.

• The CAM should be correctly inserted, it is

impossible to insert fully if reversed. The CAM or

the TV terminal may be damaged if the CAM is

forcefully inserted.

• Some CAMs may require setting up. Refer to

the module instruction manual for details of the

settings.

• If your viewing card subscription is not valid for the

received service you will see a message such as

‘SCRAMBLED PROGRAM’...’You are not entitled

to watch this program’.

BTVD9xxx6_IB_BUSH 2011_Rev3.indd 10 6/1/2011 16:27:33

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 35 36

Comments to this Manuals

No comments

Bush BTVD91186B User Manual Page 10

Comments to this Manuals

Related products and manuals for DVD players Bush BTVD91186B